Large piles of bottles and cans can quickly take over a busy workspace. The BS 400 pet bottle shredder helps you cut that waste down to a manageable size. It runs on a 5 HP motor and is made for continuous work.
How the BS 400 pet bottle shredder works
Two shafts cut the material together inside a 410 x 410 mm chamber. Pieces come out at 6 to 12 mm by 50 to 100 mm. Output is 125 to 175 kg an hour, depending on what you feed it. The motor also starts and stops automatically, so you can focus on loading. Because the working cycle is continuous, the machine can keep running while you load.
What you can feed into it
Load PET water bottles and soft drink bottles of up to 2 litres, 110 mm wide and 400 mm long. The hopper feed keeps loading simple. It also takes HDPE bottles, oil cans, metal cans, paper cups and plastic cups. That makes it a flexible twin shaft pet bottle shredder for mixed waste.
Why the BS 400 pet bottle shredder suits daily use
Protection comes built in. An overload and overheat auto reverse PCB looks after the motor, and overheat protection adds a second safeguard. Idle noise stays under 65 dB, so the machine stays quiet until work begins.
Size, power and bin
This pet bottle shredder machine stands 2000 mm tall, 800 mm wide and 1000 mm deep. It weighs 495 kg, or 560 kg with packing, and runs on 415 V, three phase, 50 Hz power. So, plan its spot before it arrives, and make sure the floor can carry its weight. A movable metal bin holds 300 litres, which means fewer trips to empty it.
If you are ready to buy a pet bottle shredder machine, this model is a dependable choice for heavy, steady shredding. Get in touch with our team to place your order today, and ask about the specifications.
Write a Customer Review